Videos
Reconfigure for Results: A Modern Approach to Surgical Tray Layouts
Surgical instrument trays are often the overlooked culprit behind workflow bottlenecks, rising costs and scheduling delays. But organizations rethinking their tray layouts are seeing major gains in their SPD workflow and in their OR turnaround.
This webinar will unpack approaches to reconfiguring instrument sets and examine real cases where reconfiguration proved an over 50% reduction in trays, freeing critical resources in both the SPD and OR.
Listen in to learn:
How to identify inefficiencies and recognize the challenges that would influence the consideration for reconfiguration.
Lessons from real examples on the most challenging reconfigurations to the most impactful.
How tray reduction plays a role in scheduling, and SPD and OR throughput.
Presented by: Kyle Kemp of ONE TRAY.
Follow us on Linkedin for more reconfirmation ideas: https://www.linkedin.com/company/3110832
CD 667
Beyond The Robot Webinar with Beckers ASC, Dr. James Germano, MD and Tim Tzimas of ONE TRAY/IST
Robotic-assisted joint reconstruction has reshaped how surgeons plan and perform total joint procedures. Most of the attention goes to implant positioning and surgical precision. Far less goes to the operating room that has to support those procedures day after day.
As total joint replacements move into ambulatory surgery centers, that gap becomes a financial problem. Instrument management, sterile processing, inventory utilization and the OR throughput now decide whether an outpatient joint program is sustainable or quietly loses money.
Join orthopedic surgeon and joint reconstruction specialist James Germano, MD for a discussion on what it takes to run an efficient, safe and financially durable outpatient joint program.
In this discussion, you’ll learn:
Where outpatient total joint programs lose efficiency and margin
How to improve OR throughput without compromising patient safety
Why collaboration across surgeons, sterile processing, infection prevention and supply chain is critical
How operational design shapes ASC profitability and long term growth.
Presented by: Dr. James Germano, MD and Tim Tzimas, President and CEO of ONE TRAY/IST.
Don’t forget to follow us on Linked in: https://www.linkedin.com/company/3110832
CD 804
ONE TRAY® Sterilization Container – No Dry Time and Moisture Explained
This animation explains how moisture can be present in our tray without causing contamination and how this technology seals, not requiring a dry time after sterilization. ONE TRAY® creates a sterile barrier for the steam sterilization of Medical Devices. This video goes into detail about our filter technology and the 3 ways the ONE TRAY® sterilization container seals to create the sterile barrier environment. No microbials can get it, and no microbials can spontaneously appear after the tray is sealed and sterilized. Learn more about this, with this look inside.
If you have any questions, you can message us here: www.onetray.com/contact, call 937.619.0138 or email us at info@onetray.com
Like us on Facebook here: https://www.facebook.com/ONETRAYIST
Connect with us on LinkedIn Here: https://www.linkedin.com/company/3110832
Follow the ONE TRAY® and EZ-TRAX™ IFU for Use. Condoc 308
A LIVE (in OR and SPD) Timelapse on SPEED. ONE TRAY® vs. Sterile Wrap
Take a look into a direct comparison when reprocessing a total knee set using ONE TRAY® and EZ-TRAX™ vs using sterile wrap. The time savings is almost a 3 hour difference PER CASE. ONE TRAY® and EZ-TRAX™ maximizes efficiency in reprocessing and allows you to take the traditional 6-8 trays per knee, down to 3. These are both live cases in an actual Sterile Processing Department and Operating Room.
If you have any questions, you can message us here: www.onetray.com/contact, call 937.619.0138 or email us at info@onetray.com
Like us on Facebook here: https://www.facebook.com/ONETRAYIST
Connect with us on LinkedIn Here: https://www.linkedin.com/company/3110832
Follow the ONE TRAY® and EZ-TRAX™ IFU for Use. Condoc 439
A Surgeon’s Perspective on how ONE TRAY®/EZ-TRAX™ transformed his facility
A testimonial to ONE TRAY®. Dr. Robert Marchand, MD, Orthopedic Surgeon provides insight into his use of ONE TRAY® and EZ-TRAX™ and how they were able to eliminate sterile wrap and numerous trays. A typical day is 8-9 trays and with ONE TRAY® his facility went down to 3-4. After incorporating EZ-TRAX, it went down to 2 trays.
Maximize reprocessing with this combination for Orthopedic Total Joint Arthroplasty sets.
If you have any questions, you can message us here: www.onetray.com/contact, call 937.619.0138 or email us at info@onetray.com
Like us on Facebook here: https://www.facebook.com/ONETRAYIST
Connect with us on LinkedIn Here: https://www.linkedin.com/company/3110832
Follow the ONE TRAY® and EZ-TRAX™ IFU for Use. Condoc 435
Triple Your Case Load While Saving Money. A Surgeons Perspective on Cost Savings using ONE TRAY®.
Robert C. Marchand, MD, Orthopedic Surgeon and Robotic Joint Replacement Expert reviews the cost savings his facility has experienced with using ONE TRAY® Sealed Sterilization Containers. He is currently saving $500 per case just in sterilization. The rapid room turnover has allowed his facility to perform 9 cases per day, rather than 3-4 which was standard before the use of ONE TRAY®.
If you have any questions, you can message us here: www.onetray.com/contact, call 937.619.0138 or email us at info@onetray.com
Like us on Facebook here: https://www.facebook.com/ONETRAYIST
Connect with us on LinkedIn Here: https://www.linkedin.com/company/3110832
Follow the ONE TRAY® and EZ-TRAX™ IFU for Use. Condoc 436